The History of
Weather-Bos™

Why use Weather-Bos™?

Comparisons

Customer Testimonials

Uses for Weather-Bos™ (i.e. roofs, sidings, fences)

Industries using
Weather-Bos™ (i.e. architects, contractors, wood product
manufacturers)

Truth vs.Confusion

Spec and Technical Data

The advantages of Pre-
Staining your wood

How Much Weather-Bos™
do I Need?

Why does wood turn grey
and dull?

The science behind the
stains which occur on wood
.

How to Become a
Weather-Bos™ Distributor/Manufacturer

Weather-Bos™ Seminars

Frequently Asked Questions

Free Orderline 1-800-664-3978

Weather-Bos™

MATERIAL SAFETY DATA SHEET
for coatings, resins and related materials


Section 1 - Product Identification


Weather-Bos™

Emergency Telephone No. (702) 789-2691
316 California Avenue, Suite 1082
Reno, NV 89509


TRADE NAME: Weather-Bos™ Stains and Paint
FORMULA: Proprietary
CHEMICAL FAMILY: N.A. Architectural Interior and Exterior Finishes


Section 2 - Hazardous Ingredients


INGREDIENTS CAS No. % ACC-IH TLV-1987
2-Amino-Methl-Propanol 124-68-5 <.1% None Established
2-Butoxyethanol 111-76-2 <1.% 50PPM-240 mg/m3
Ammonium Hydroxide 1336-21-6 <.005% 50PPM-35mg/m3


Section 3 - Physical Data


BOILING POINT: + or - 220 F WEIGHT/GALLON: 8.2 lbs.
SOLUBILITY IN WATER: Excellent SOLIDS BY WEIGHT: Up to 78%
APPEARANCE AND COLOR: ODOR: Negligible
Clear/Amber unless Pigmented


Section 4 - Fire and Explosion Hazard Data


FLASH POINT: None
EXTINGUISHING MEDIA: Will Not Burn
FLAMMABILITY CLASSIFICATION: (DOT) Non-Restricted
(OSHA) Not-Regulated


Section 5 - Reactivity Data


STABILITY: Stable

HAZARDOUS POLYMERIZATION: Will Not Occur

INCOMPATIBILITY: Strong Oxidizing Agents. Insoluble in Oil.

CONDITIONS TO AVOID: May Be Mildly Corrosive.

HAZARDOUS DECOMPOSITION PRODUCTS: None Known


Section 6 - Spill Or Leak Procedures


  1. Absorb spill with absorbent material.
  2. Dispose of waste in a manner consistent with local, state, and federal regulations.


Section 7 - Health and Safety Data


THRESHOLD LIMIT VALUE (TLV): Not established for this product.

EFFECTS OF OVEREXPOSURE:

None observed from inhalation or skin contact, however some individuals may react differently to exposure of this product. Use of the proper safety equipment is recommended.

    FIRST AID:

  • Skin: Wash with soap and water. Launder clothing.
  • Eyes: Flush with large quantity of water.
  • Inhalation: Remove to fresh air. If breathing is difficult or has stopped seek medical help immediately. Perform C.P.R. if necessary.
  • Swallowing: Drink milk or water. Induce vomiting. Call physician if necessary. May be harmful if swallowed.

SPECIAL PRECAUTIONS:

Users of this product should take care not to breathe spray mist or sanding dust.


Section 8 - Protective Equipment


VENTILATION: Provide adequate ventilation to maintain atmosphere below TLV level.

RESPIRATORY: Use NIOSH approved respirator with faceplate.

EYE: For sensitive eyes use splash goggles or safety glasses with side shield.

GLOVES: For sensitive skin use gloves that remain waterproof during repeated use.


Section 9 - Liability Statement


The information contained on this Material Safety Data Sheet is believed to be correct however is not warranted as such by Weather-Bos™ or any of its affiliates or subsidiaries.

Users of this product should, prior to using this product, confirm the information on this M.S.D.S. as to how it pertains to their specific needs, uses and circumstances.

CLICK ON THE SUN TO REQUEST FURTHER INFORMATION
Home Frequently Asked Questions Uses Product Information Business Opportunity Search Purchasing Environmental Issues

©1996-2005 Weather-Bos™ International. All Rights Reserved. Website Design by Hinman Associates .